• 青岛欣大荣数控机器有限公司
  • 地址:青岛市城阳区仙山东路北
  • 电话:13791821849
  • 联系人:唐经理
  • 网址:www.qdxdrsk.com
新闻中心当前位置:首页-新闻中心
    变频器异常是电子开料锯最常见的问题之一
    2015-12-1 13:42:09
    变频器异常是电子开料锯最常见的问题之一。数控排钻通常造成变频器异常的原因有两个,一是因为电子开料锯的链条由于长时间的使用而发生松懈现象,从而导致变频器承受了过量的输出量,从而导致异常;
    Abnormal frequency converter is one of the most common problem of electronic cutting saw. Usually the cause of abnormal frequency converter has two, one is because of electronic cutting saw chain slack occur due to the use of long time, which leads to bear too much output frequency converter, which can lead to abnormal;
    另一原因就是因为电子开料锯的锯座电机发生故障。为了解决变频器异常这一问题,就需要操作者先对故障原因做到心中有数,然后根据原因找出相应的解决措施:
    Another reason is because electronic cutting saw sawing machine breakdowns. In order to solve the problem of abnormal frequency converter this, you need to the operator for the cause of the problem first accomplish know fairly well, and then according to the reason to find corresponding solutions:
    若是因为链条问题就需要及时对链条进行调节,使其重新恢复到正常,若因为电机发生故障就需要及时进行电机的更换,从而确保变频器恢复正常。

    If for chain chain problem requires timely adjustment, make its restore to the normal, if because of change of motor failure needs in a timely manner, to ensure that the inverter back to normal.

    本文由数控排钻机器有限公司向大家友情奉献.更多有关的知识请点击:http://www.qdxdrsk.com/我们将倾情为您解答.

网站首页 | 公司简介 | 服务项目 | 新闻中心 | 工程案例 | 服务流程 | 在线留言 | 联系我们
版权所有:青岛欣大荣数控机器有限公司  手机:13791821849  电话:唐经理  地址:青岛市城阳区仙山东路北
流量统计:  


销售一部


售后支持
售后支持