• 青岛欣大荣数控机器有限公司
  • 地址:青岛市城阳区仙山东路北
  • 电话:13791821849
  • 联系人:唐经理
  • 网址:www.qdxdrsk.com
新闻中心当前位置:首页-新闻中心
    影响并有害于雕刻机的噪音的主要表现
    2015-12-22 14:32:55
    影响并有害于雕刻机的噪音主要表现为两个方面:
    Impact and harmful to carving machine noise is mainly two aspects:
    1、轴向行走时发出异常噪音1, axial abnormal noise when walking这类现象多存在于X轴,对于木工雕刻机来说,大部分都是轴向机电轴承损坏或X轴向导轨缺少润滑油,过脏、过紧、滚珠磨损、滚珠掉落等。对于这类现象,一定要及时停止运作并立即进行处理。
    This kind of phenomenon exists in the X axis, more for woodworking engraving machine, most of them are the axial mechanical and electrical bearing damage or X axial guideway lack of lubricating oil, too dirty, too close, ball wear, ball drop, etc. For this kind of phenomenon, must immediately stop their operations and processed in a timely manner.
    2、主轴电机运行时发出异常噪音2, spindle motor, abnormal noise when running这类噪音的产生,证明主轴轴承存在质量问题或者主轴轴承使用寿命已到,或磨损后质量下降或损坏,此时可以考虑更换。

    The production of this kind of noise, prove the existence of main shaft bearing quality problem or the service life of the mainshaft bearing has to, or lower quality after wear and tear or damage, can consider to change at this time.

    本文由定制家具生产线厂家发表提供,更多详情请关注公司网址:http://www.qdxdrsk.com/

网站首页 | 公司简介 | 服务项目 | 新闻中心 | 工程案例 | 服务流程 | 在线留言 | 联系我们
版权所有:青岛欣大荣数控机器有限公司  手机:13791821849  电话:唐经理  地址:青岛市城阳区仙山东路北
流量统计:  


销售一部


售后支持
售后支持