• 青岛欣大荣数控机器有限公司
  • 地址:青岛市城阳区仙山东路北
  • 电话:13791821849
  • 联系人:唐经理
  • 网址:www.qdxdrsk.com
新闻中心当前位置:首页-新闻中心
    卧式加工中心的正确使用三项要点
    2016-8-4 14:20:25
    安装卧式加工中心的环境
    Installation of horizontal machining center
    卧式加工中心应该安装在远离震源、不要被阳光直射、没有热辐射和没有潮湿的地方。如果安装卧式加工中心的地方附近有震源,应该在卧式加工中心的周围设置防震沟。如果不设置防震沟会直接影响到卧式加工中心的加工精度以及稳定性,时间一久就会影响到电子元件接触不良,发生故障,影响卧式加工中心的可靠性。
    Horizontal machining center should be installed in the distance from the source, do not be direct sunlight, no heat radiation and no damp places. If the installation of horizontal machining center in the vicinity of the source, should be in the vicinity of the horizontal machining center set up a shock ditch. If you do not set the aseismic trench will directly affect the horizontal machining center machining accuracy and stability, a long time will affect the electronic element poor contact, failure, the effect of horizontal machining center reliability.
    电压电流严格控制
    Tight control of voltage and current
    卧式加工中心一般都是安装在加工车间了,而加工车间的机械设备众多,难免导致电网波动大。所以卧式加工中心安装的位置必需严格控制电源的电压和电流,必需把电源的电压和电流控制在卧式加工中心允许范围之内,一定要保持电源的电压和电流稳定,否则会直接影响卧式加工中心的正常工作。
    Horizontal machining centers are generally installed in the processing plant, and the processing of the large number of machinery and equipment, will inevitably lead to large fluctuations in the power grid. So the installation of horizontal machining center position must be strict control power supply voltage and current, must take the power supply voltage and current are controlled in the allowable range of horizontal machining center, must maintain the voltage and current power supply is stable, otherwise they will be the normal work of the direct impact on horizontal machining center.
    温度和湿度会直接影响卧式加工中心
    Temperature and humidity will directly affect the horizontal machining center
    卧式加工中心一般要处于低于30摄氏度的环境下才能正常工作,一般情况下卧式加工中心的配电箱内都有设置排风扇和冷风机,以保证电子件和中央处理处于恒温状态下工作。如果温度和湿度过高会导致控制系统的元件寿命降低,导致卧式加工中心故障无故增多。湿度增高的话,灰尘就会在集成电路板上增多直接导致接触不良和短路的故障发生。
    Horizontal machining center generally is less than 30 degrees Celsius environment can work normally, generally horizontal machining center of the power distribution box have is provided with an exhaust fan and a cooling fan, to ensure that the electronic parts and the central processing in constant temperature state. If the temperature and humidity is too high will lead to the control system components life reduced, resulting in the failure of the horizontal machining center for no reason. Humidity increases, the dust will increase in the integrated circuit board directly lead to poor contact and short circuit faults.
    本文来自:大型板材加工中心更多的内容请点击:http://www.qdxdrsk.com我们将会为您提问的问题提供一个满意的服务,欢迎您的来电!
    This article from: large plate processing center more content please click: http://www.qdxdrsk.com we will provide you with a satisfactory service, welcome your call!
网站首页 | 公司简介 | 服务项目 | 新闻中心 | 工程案例 | 服务流程 | 在线留言 | 联系我们
版权所有:青岛欣大荣数控机器有限公司  手机:13791821849  电话:唐经理  地址:青岛市城阳区仙山东路北
流量统计:  


销售一部


售后支持
售后支持